Here is a detailed list of work that is done in our typical refurbishing process.

• Replace bad circuit boards and rebuild bad connectors as necessary.
• Add remote battery or NVRAM. (Batteries leak ACID - REMOVE NOW - A MUST)
• Replace backbox incandescent bulbs with LED BULBS- (Optional) See photo above.
• Clean translite and translite glass.
• Replace translite trim if needed.
• Replace playfield glass if scratched. (Optional) (We even sell HD Glass - ASK US)
• Vacuum inside of a cabinet. (9/10 Pinball machines are full of old parts/fuses)
• Print new rule card for apron. (The original is either missing or not clean/white)
• Replace playfield incandescent bulbs with LED BULBS (Optional) See photo above - (This is a MUST - On top of appearance - The efficiency is way better)
• Reflow lamp boards connections if needed
• Replace or repair broken scoops if needed.
• Do full playfield teardown, Clean/Wax and Re rubber. (Probably not been done)
• Replace star posts/lane guides if needed.
• Clean plastics, ramps etc. and reassemble. Replace broken Plastics if available.
• Rebuild flippers/switches if needed
• Install new balls. (pinballs get pitted/rusted)
• Replace legs and levelers if needed (Optional) (This is So important)
• Replace lock and keys to coin door and backbox if needed. (Keep hands out)
• Do thorough playtesting and make any final adjustments.

THE AVERAGE COST FOR THIS SERVICE  $1500

SEVERAL FACTORS EFFECT THE PRICE.

EXAMPLES - YOU BRING THE PINBALL TO US, NEW LEGS NOT NEEDED, LED LIGHTS NOT REQUESTED, GAME BOARD REPLACEMENT NOT NEEDED.

THIS SERVICE IS NOT AVAILABLE IN HOME.